How To Install A Kisser Button: A Complete Guide

by | Oct 15, 2023

“How to install a kisser button?” While navigating through various archery accessories, each offering its own edge, we find that understanding their installation is key. The kisser button, simple yet effective, ensures consistent drawing in archery.

Installing a kisser button involves marking the point on your bowstring that touches the corner of your mouth, attaching the button at that spot, and adjusting as needed for comfort and shooting consistency. This small accessory aids archers by ensuring a consistent anchor point on every draw, thereby improving accuracy and shot repeatability. Practice is essential after installation to adapt to the new reference point during shooting.

In this complete guide, we will explore the straightforward, but crucial steps to properly install it, and ensure you reap its benefits in improving your shooting accuracy.

What Is A Kisser Button?

A kisser button is a small plastic device that is attached to the bowstring of a bow. It is called a “kisser” button because it is placed between the lips of the archer when the bowstring is drawn, which helps the archer to become more consistent in their anchor point and improve their accuracy.

The kisser button is a reference point that helps the archer to maintain a consistent anchor position with the alignment between the kisser button and lips. 

How to install A kisser button

Acting as an additional anchor point, the kisser button is a simple and inexpensive tool that helps to improve shot consistency and accuracy

The kisser button is placed on the bowstring approximately 1-2 inches above the nock locator.

The archer can adjust the kisser button up or down until it touches the corner of their mouth at full draw

The kisser button is a must-have for beginners and can also be helpful for more advanced archers who want to maintain consistency in their form

Related: How To Aim A Recurve Bow

How To Install A Kisser Button: Step-by-Step

Tools You Will Need To Attch Kisser Button:

  • Knievel’s pliers or needle-nose pliers
  • Tape measure
  • Two clamps that come with the kisser button

Steps to attach a kisser button to your bowstring:

  1. Nock an Arrow: Begin by nocking an arrow and positioning it on the arrow rest.
  2. Draw the Bow: With an arrow nocked, draw the bow to your anchor point, ensuring a consistent and comfortable stance.
  3. Mark the Spot: While at full draw, have an assistant mark the spot on the string that touches the corner of your mouth. This will be your reference point for installing the kisser button. Usually 1.5 inches above the D-loop.
  4. Secure the Kisser Button: Un-nock the arrow and carefully let down the bow. Place the kisser button on the marked spot on the string. Some buttons thread onto the string, while others may require a bow press and a separation of the string strands for installation.
  5. Check the Position: Nock the arrow again, draw the bow, and check if the kisser button is comfortably hitting the corner of your mouth. Adjust as necessary for comfort and consistency.
  6. Fine-tune: You may need to fine-tune the button’s position after trying out a few arrows, just to make sure the kisser button doesn’t move around.
  7. Secure the Button: Once you’re satisfied with the position, secure the kisser button in place following the manufacturer’s instructions, which might involve tying it in place or clamping it securely.
  8. Practice: Spend some time practicing with your new setup to build consistency in your shot routine. You can adjust the kisser higher or lower between shots.

Additional Tips

  • Use needle-nose pliers to open the metal clip on the kisser button
  • Have a friend adjust the kisser button higher or lower for you if needed
  • Make sure to follow the manufacturer’s instructions and use the appropriate tools and materials

Removing a kisser button is easy. Simply take the needle nose pliers and open the metal clip. The button should slide off the bowstring without a problem.

Do You Need A Kisser Button? 

A kisser button aids some archers in maintaining draw and head position consistency, enhancing accuracy. However, some archers achieve consistent accuracy without using a kisser button.

It ultimately depends on the individual’s own style, comfort level, and personal preference.

By touching the same spot on their lips or cheek with the kisser button, archers can help eliminate variations in their anchor point, which can lead to inconsistent shot placement.

It can also serve as a reference point for the archer’s eye, helping them to maintain proper alignment with the target.

However, not every archer finds a kisser button necessary or beneficial. It can sometimes feel uncomfortable or distracting for some individuals, and they may achieve consistent results without it.

It’s important for each archer to experiment and find what works best for them.

Some archers using a kisser swear by it and find that it greatly improves their archery, while others prefer to maintain their consistency without one. 

It’s advisable to try a few arrows with and without a kisser button to see if it makes a noticeable difference in your accuracy and comfort level. 

Related: Peep Sights (Everything You Need To Know)

Pros and cons of using a kisser button

Pros:

  • Helps to maintain consistency in draw and head positioning
  • Boosts confidence, especially for new archers
  • Can improve shot consistency and accuracy

Cons:

  • Some archers feel that a kisser button is unnecessary
  • The reference point may be imprecise
  • Some archers find that a kisser button makes it harder to stay consistent
  • 2 anchor points can be distracting
  • Kisser might interfere with you aim if you also use a peep sight

Ultimately, whether or not you use a kisser button is up to you. If you are a beginner, a kisser button can be a helpful tool to improve your consistency and accuracy.

However, if you are an experienced archer who already has a consistent anchor point, you may not need a kisser button.

Using a Kisser Button

Using The Kisser Button 

Steps in using a kisser button in archery:

  1. Attach the kisser button to your bowstring at around 1.5 inches above your nocking point
  2. Adjust the kisser button up or down until it touches the corner of your mouth at full draw
  3. In full draw, have someone mark the spot on the bowstring where the kisser button touches the corner of your mouth
  4. Remove the kisser button from the bowstring and tie a nocking point below the mark
  5. Reattach the kisser button to the bowstring above the nocking point
  6. Draw the bowstring back and anchor the kisser button in the corner of your mouth
  7. Use the kisser button as a reference point to maintain a consistent draw and head position

It is important to adjust the kisser button to the correct position for your individual draw length and anchor point

The kisser button should be placed at the corner of your mouth at full draw, which will help you to maintain a consistent anchor point and improve your accuracy.

How does a kisser button help with accuracy in archery?

A kisser button can help with accuracy in archery in the following ways:

  1. Provides a consistent reference point: A kisser button provides a consistent reference point for the archer to anchor their draw and head position. This helps to ensure that the archer maintains the same form and alignment for each shot, which can improve your aim.
  2. Boosts confidence: A kisser button can boost the confidence of new archers by providing a physical reference point that they can feel. When the archer feels the kisser button in the corner of their mouth, they know that they are consistent, which can help them to shoot with more confidence.
  3. Improves consistency: Archery is all about consistency, and a kisser button can help to improve consistency in form and shot execution. When an archer has a consistent form, they can tune their bow to ensure that they shoot in the middle of their target.

However, it is important to note that a kisser button is not for everyone. Some archers find that a kisser button is unnecessary or distracting.

Additionally, using a kisser button with a peep sight can be problematic, as it can create conflicting reference points for the archer.

Ultimately, whether or not a kisser button helps with accuracy depends on the individual archer and their preferences.

Kisser Button Vs Nose Button

Here are the advantages of using a kisser button over a nose button:

  1. Consistency: A kisser button can help you maintain a consistent anchor point and head position, which can improve your accuracy
    This is because the kisser button provides a physical reference point that you can feel in the corner of your mouth, which helps you to maintain the same form and alignment for each shot.
  2. Ease of use: Kisser buttons are easy to install and adjust, and they do not require any special tools
    They are also less likely to interfere with other equipment, such as a peep sight
  3. Versatility: Kisser buttons can be used with a variety of bows and shooting styles, including traditional archery, compound, and recurve/longbow
  4. Availability: Kisser buttons are widely available and come in a range of sizes, shapes, and materials

Some archers prefer a nose button because it allows them to align their shot more quickly and easily, while others prefer a kisser button because it provides a more consistent reference point.

Are Kisser Buttons Suitable For Both Compound And Recurve Archers?

Yes, kisser buttons are suitable for both compound bows and recurve bows. Kisser buttons are popular among compound and recurve archers because they help to maintain a consistent anchor point and head position, which can improve accuracy. 

Kisser buttons are easy to install and adjust, and they do not require any special tools. They are also less likely to interfere with other equipment, such as a peep sight.

FAQs

How high should a kisser button be?

A kisser button should be positioned so that it touches the corner of your mouth when the bow is at full draw.

How do you install a Pine Ridge Kisser button?

To install a Pine Ridge Kisser button, slide it onto the bowstring, align it with the corner of your mouth at full draw, then secure it using the provided clamps, without the need for a bow press.

What is a slotted kisser button?

A slotted kisser button features a slot or groove, allowing it to be installed onto the bowstring without separating the strands, offering a quick and easy setup.

How do you remove a kisser button from a bow string?

To remove a kisser button, carefully cut and remove any tying thread, or loosen the clamps or attachment mechanisms, and slide the button off the string. Ensure to exercise caution to avoid damaging the bowstring.

Conclusion

Installing a kisser button on a compound or recurve bow is straightforward. It offers numerous archery benefits by reducing inconsistency.

The button effortlessly guides you to the same anchor point on your face with each draw.

The kisser button helps you keep the same orientation every time, without the need to rotate your head between shots. 

In summary, mastering the art of installing a kisser button aligns closely with enhancing your archery precision and consistency.

By securing this small accessory at the right spot on your bowstring, you solidify a reliable anchor point that guides every draw and release.

The straightforward yet pivotal process of its installation underscores its significance in your archery toolkit.

0 Comments